SAXON SM45 METAL DETECTOR

The Saxon SM45 is a modern easy to use detector operating on
the Motion principle. It is similar to the SM35 with some added features for the
more advanced user.

The extra controls are mounted on
a small box situated just in front of the handgrip
The SM45 is similar to the SM35 but has several added features
that will be helpful to the more experienced user. The inclusion of a gain
control on the SM45 allows the sensitivity to be set a bit higher than the SM35.
When searching difficult areas such as high mineralized soil or salt wet beaches
the gain can be reduced a bit to avoid chattering or false signals. An all-metal
pinpoint switch is also included on the SM45.
As the M in the name implies, the SM45 is a motion detector which
means that it can discriminate and cancel out ground mineralisation at the same
time. To do this the search head must be kept moving in order to register a
target; the sweep speed, however, can be quite slow. The detector also runs on
'silent search'. This means that tuning is taken care of electronically, and the
only sound normally to come from the headphones will be when the detector
locates a metal object in the ground. The Saxon SM45 is of the modern, 'cranked
stem' design, now favored by most manufacturers and detector users. The
handgrip is of molded foam rubber, and the upper stem terminates in a built in
arm rest. The stem itself breaks down into
three parts. This allows easy transportation to and from sites. It also means
that the SM45 will fit into a small bag or suitcase should you be thinking of
taking it abroad on holiday. Stem adjustment is by means of an aluminium locking collar,
and is infinitely variable. With its green and black color scheme, the SM45 has
a very 'workman like' look to it, that is actually carried through in its
construction. Robust but lightweight aluminium has been used (for control box,
armrest, and shaft), rather than the usual cheap plastics, and the detector has
been designed to take all the hard knocks that come with field usage. The battery compartment of the SM45 is situated at the
bottom of the control box and separated from the rest of the electronics
(to prevent damage in case of battery leakage). Access is by means of a
metal plate/stand held in position by two coin slot headed screws. The
circuitry is powered by a multiclip of eight AA penlight batteries (12 volts)
and battery life is excellent. This battery pack is connected to a small socket
situated at the rear of the detector to facilitate on board charging. A small
charger unit is available as an extra at £16.50.

Rear view of control box showing
Speaker, Headphone socket, and Charger socket.
-
Robust but lightweight Aluminium construction ( with
minimal use of plastics )
-
Full range discrimination from nails to ringpulls (
means less unnecessary digging )
-
Full range sensitivty control ( for difficult sites
and salt wet beaches )
-
All metal pinpoint switch
-
Detachable 8 inch 2D 100% carbon screened searchcoil
( with good quality plug and socket )
-
Advanced microchip electronics ( with low
battery consumption )
-
Excellent response to small gold and silver coins
-
Detachable telescopic shaft ( infinitely adjustable
)
-
On board charger socket ( easily converts to
rechargeables )
-
Built in speaker
-
Headphone socket
-
Automatic ground exclusion and tuning ( just switch
on and go )
-
Interchangeable searchcoils available ( 5"
and 12" )
-
Made in England with excellent backup repairs and
servicing

Guaranteed two years
parts and labour
£350.00
plus £7.00 p+p
back to home page